Category
Pre-Terminated Fiber Optic Cable
- Factory precision polishing + 100% optical testing, stable insertion loss, more reliable than field splicing
- Greatly shorten construction time; no splicing machine & skilled technicians required
- Reduce field failure rate and rework cost
- Standardized length, customizable connector types, polarity, fanout length
- Equipped with pulling eye, connector protective caps for safe cable pulling
- Support indoor LSZH flame retardant & outdoor water-blocking armored versions
Why Pick Pre-terminated Fiber Cables Over Field Termination?
Pre-terminated fiber optic cable is factory pre-finished with polished & tested fiber connectors. Available with indoor LSZH cable or outdoor GYTA/GYTS/GYTA53/Figure-8 cable. Connector options include LC, SC, FC, ST and MPO/MTP. Single mode OS2 and multimode OM3/OM4/OM5 fiber optional. Plug-and-play design saves huge on-site splicing work, widely used in data centers, 5G fronthaul, cross-building communication and FTTH projects.
Pre-terminated cables have many pluses. Doing it in the field needs experts. But, avoid curing epoxy with premade. Pre-terminated options have low return loss. Fiber pieces and splicers are gone. Perhaps, use a cable with many strands. Benefit from low reflection using APC. Cables are tested well, exceeding norms.
The outside could be LSZH material. Choose simplex or the duplex kind. Single-mode fiber is nine microns. A thin cable works inside well. Performance becomes very consistent. Obtain ready-made lengths, saving much time.
Types of Pre-Terminated Fiber Optic Cables
Indoor/Outdoor Cables
These cables offer much flexibility here. They resist sun and water outside. A special gel will stop water coming. These cables handle cold temperatures. You can pick loose tube design. Because, they often use multimode fibers. Find them with different connector types. Its outer jacket is strong plastic. Receive long lengths for big jobs.
Patch Cables
These cables make short area links. They link gear within a server rack. Usually, length ranges one to ten meters. Get duplex LC for very fast links. Simplex kind are ready to use, too. Moreover, you can pick any jacket colors. These allow ten Gigabit Ethernet speeds. Connector boots add to the protection. Multimode fiber is often inside.
Breakout Cables
Breakout cables connect to gear easier. Each fiber has a small subunit. Consequently, connect without needing patch panels. Fan-out kits are not needed often. A colored jacket helps in finding. Find with LC or even SC ends. Commonly, they use a tight-buffered design. Often using for inside short run. Get some fiber quantity cables.
Pre-Terminated Fiber Cable Specifications
| Specification | Multimode OM3 | Multimode OM4 | Single-mode OS2 | Armored Multimode | Armored Single-mode | Indoor Distribution | Outdoor Loose Tube | Breakout 2.0mm |
| Fiber Core (µm) | 50/125 | 50/125 | 9/125 | 50/125 | 9/125 | 50/125, 9/125 | 50/125, 9/125 | 50/125, 9/125 |
| Max. Attenuation | 3.5 dB/km | 3.0 dB/km | 0.4 dB/km | 3.5 dB/km | 0.5 dB/km | 3.0 dB/km | 1.0 dB/km | 3.5 dB/km |
| Bandwidth (MHz.km) | 2000 | 4700 | >10000 | 500 | >10000 | 850, 2000 | 500 | 500 |
| Typical Length | Up to 300m | Up to 550m | Up to 10km | Up to 200m | Up to 5km | Up to 100m | Up to 2km | Up to 50m |
| Connector Types | LC, SC, MTP | LC, SC, MTP | LC, SC, MTP | LC, SC | LC, SC | LC, SC, MTP | LC, SC, MTP | LC, SC |
| Jacket Material | PVC, LSZH | PVC, LSZH | PVC, LSZH | Steel, PVC | Steel, LSZH | PVC | PE, LSZH | PVC, LSZH |
| Operating Temp. | -20°C to 70°C | -20°C to 70°C | -40°C to 85°C | -40°C to 85°C | -40°C to 85°C | -20°C to 70°C | -40°C to 85°C | -20°C to 70°C |
| Fiber Count | 2-144 | 2-144 | 2-288 | 2-72 | 2-144 | 12-144 | 12-288 | 2-24 |
| Crush Resistance | 1000 N/cm | 1000N/cm | 800 N/cm | 2000 N/cm | 2200 N/cm | 500 N/cm | 1500 N/cm | 800 N/cm |
Reliable Fiber Optic Solutions
YUNDA gives great fiber options. Gain from precisely made cables here. Get consistent low insertion loss. Our fiber cables use best glass. These ensure fast transmission always. Pick from connector styles freely. Receive cable lengths of many feet. Jackets could be PVC or others. Get the long system use warranty. Experience lower delays with products.
Related Products
Share GYTA Fiber Optic Cable to Your Social Media
Ultimate FAQ Guide to Fiber Optic Cable
What types of fiber optic cables do you manufacture?
Our factory produces a wide range of fiber optic cables for different applications:
Outdoor Fiber Optic Cable
- ADSS Fiber Optic Cable
- OPGW Fiber Optic Cable
- GYTA Fiber Optic Cable
- GYTS Fiber Optic Cable
- GYXTW Fiber Optic Cable
- Armored Fiber Optic Cable
- Direct Burial Fiber Cable
- Duct Fiber Optic Cable
- Aerial Fiber Optic Cable
FTTH Fiber Optic Cable
- FTTH Drop Cable
- GJYXCH
- GJYXFCH
- Indoor Fiber Cable
Special Fiber Optic Cable
- Submarine Fiber Optic Cable
- ASU Fiber Optic Cable
- Hybrid Fiber Cable
- Air Blown Fiber Cable
We can provide fiber optic cable solutions for telecom operators, ISPs, contractors, distributors, and government projects.
Where is your fiber optic cable factory located?
Our fiber optic cable manufacturing facility is located in China, with modern production lines and complete testing equipment.
The factory includes:
- Fiber drawing and coloring equipment
- Cable extrusion production lines
- SZ stranding machines
- Armoring production lines
- Optical performance testing equipment
- Mechanical performance testing equipment
We have the ability to produce large-volume orders while maintaining consistent quality.
What is your monthly production capacity?
Our factory has strong production capacity to support both small and large projects.
Typical production capacity:
- ADSS Cable: thousands of kilometers per month
- GYTA/GYTS Cable: large-scale continuous production
- FTTH Drop Cable: high-speed mass production
For large projects, we can arrange dedicated production schedules to ensure stable delivery.
Can you provide customized fiber optic cables?
Yes. We provide OEM and ODM customization services according to customer requirements.
Customization options include:
- Fiber count (2 cores, 4 cores, 12 cores, 24 cores, 48 cores, 96 cores, 144 cores, etc.)
- Fiber type (G652D, G657A1, G657A2, OM1, OM2, OM3, OM4)
- Cable structure
- Jacket material
- Cable color
- Printing information
- Reel size
- Packaging requirements
Our engineering team can recommend the most suitable cable design based on your installation environment.
What fiber types do you use?
We mainly use high-quality optical fibers from reliable suppliers.
Available fiber types:
Single Mode Fiber
- G652D
- G657A1
- G657A2
Multimode Fiber
- OM1
- OM2
- OM3
- OM4
G652D is commonly used for backbone networks, while G657A1/A2 is widely used for FTTH applications because of its excellent bending performance.
What standards do your fiber optic cables meet?
Our fiber optic cables comply with international standards, including:
- IEC standards
- ITU-T recommendations
- RoHS requirements
- ISO quality management standards
Different cable types can meet specific requirements such as:
- IEC 60794 Fiber Optic Cable Standard
- ITU-T G.652/G.657 Fiber Standard
- ASTM and customer-specific requirements
How do you guarantee fiber optic cable quality?
Quality control is one of our factory priorities.
Each production stage is strictly inspected:
Raw Material Inspection
- Optical fiber quality
- Strength member
- Jelly compound
- HDPE jacket material
Production Testing
- Fiber attenuation testing
- Tensile strength testing
- Crush resistance testing
- Temperature cycling testing
Final Inspection
- Optical performance test
- Appearance inspection
- Length verification
- Packaging inspection
Every cable shipment is tested before delivery.
What testing equipment do you have?
Our factory uses professional testing equipment, including:
- OTDR testing equipment
- Tensile testing machines
- Crush resistance testers
- Environmental testing chambers
- Fiber attenuation testers
- Diameter measurement equipment
These tests ensure cable reliability during installation and long-term operation.
What is the minimum order quantity (MOQ)?
MOQ depends on the cable type and specifications.
Typical MOQ:
- Standard fiber optic cable: flexible MOQ
- Customized cable: depends on production requirements
- Large projects: negotiated according to project volume
Please contact our sales team for a customized quotation.